How to Use Kreg Pocket Hole Jig

Are you in the mood for another Do-It-Yourself (DIY) woodwork? Then get a Kreg Pocket Hole Jig and start collecting the rest of the materials that you will be needing! Whether you plan to make a wooden comb, a wooden chair, and the likes, you should be fond of using the Kreg Pocket Hole Jig to make the construction easier!

After gathering all the materials, it is now time to study how to use a Kreg Pocket Hole Jig to make sure that you will not fail. To help you understand the directions engraved in the box, we have summarized the steps to help you start your DIY project. Here’s how to use a Kreg Pocket Hole Jig to any woodwork you plan to do:

How to use a Kreg Pocket Hole Jig

Step 1: Understand the instrument

You will find a hard time in understanding how to use a Kreg Pocket Hole Jig if you do not know exactly what you have in your hand. Take some time looking at the details of your Kreg Jig, check the labels and the marks, and analyze how you can make it work before you proceed with the tutorial below.

Step 2: Settle in a workbench, and get wood

Workbench is not really a must if you do not have any near you. Just make sure that you are working in a space with no kids who can go bubbly while you work with a Kreg Jig. It is best to conduct the woodwork outside your house to minimize the mess you could possibly bring.

RELATED POST:  Discussing The Difference Between A Planer And A Sander

Next step is to get a piece of wood so you can practice how to make your Kreg Jig work. Mark the side of the wood that you want to put a hole to, and then use the clever to clip it with the Kreg Jig clamp. Make sure that the wood will not get misplaced because it might cause a wrong hole and a screw-bolt mismatch.

Step 3: Get the drill bit

If you think that the wood is set and you have placed your marks correctly in the Kreg Jig, it is now time to start making holes. Get a drill bit and start piercing the piece of wood. When it is done, carefully remove the wood from the clamp of the Kreg Jig.

Drill Bit

Step 4: Start doing the joints

Prepare the screws that you will be using. Make sure that you have screws that are compatible with the holes that you just made. Also, be careful of choosing the size of the screws and bolts that you will use. Usually, it depends on the quality and thickness of the lumber. Using the drill bit, put the screws inside the holes made by the Kreg Jig to join one piece of wood to another.

Step 5: Check for possible mispairings

Check if you have successfully screwed all the woods together by shaking it all slowly. If none of the joined pieces of woods move, then you have used the Kreg jig, the drill bit, and the screws correctly. If not, try to repeat screwing because it might just be loosening.

To see exactly how to use a Kreg Pocket Hole Jig, watch the short YouTube tutorial below:


Knowing how to use a Kreg Pocket Hole Jig is a big help especially when we are into DIY woodworking. It makes us create a more durable and less fallacious furniture and wood products, further increasing our productivity and time to think for more other possible projects.

By the use of Kreg Pocket Hole Jig, you can now make anything you want be it a wooden comb or a wooden chair. Everything has been made easier and possible by using this wood tool.

Have you learned how to use Kreg Pocket Hole Jig through this tutorial? Share your insights and comments below!

Leave a Comment